PLEASE NOTE:
This page CANNOT be electronically submitted
and must be PRINTED and then FAXED. Print this document -- the "TEMA Data
Sheet" (expect 2-3 printed pages) and, after filling it out, fax it to Doyle
& Roth at 212-248-4780.
INSTRUCTIONS:
- The items marked with an "(A)" are required to thermally rate and quote a heat exchanger.
- Those items marked with a "(B)" denote the thermal properties which are needed if the process fluid is not in our data bank. If the process fluid is condensing and not in our data bank, a condensing curve is also required.
- Those items marked with a "(C)" are required for mechanical quotation for predesigned equipment.
Your Company Name
Date
Telephone
Fax
Contact Name
End User
Address
.
Installation Location
Equipment Tag No.
Service of Unit
(A) Type
(A) Horiz/Vert
Size
Connected In
Parallel
Series
Sq. Ft. Surf./Unit (Gross)(Eff.)
Shell/Unit
Sq.Ft./Shell (Gross)(Eff.)
Performance of One Unit
Fluid Allocation
(In) 
Shell Side (Out)
(In) Tube Side (Out)
(A) Fluid Circulated
.
.
(A) Fluid Quantity Total - Lb/Hr
.
.
(A) Vapor (In/Out) - Lb/Hr
(A) Liquid - Lb/Hr
.
.
.
.
(A) Steam - Lb/Hr
.
.
.
.
(A) Water - Lb/Hr
.
.
.
.
(A) Non-Condensable - Lb/Hr
.
.
.
.
(A) Temperature (In/Out) °F
(B) Density
(B) Viscosity, Liquid Cp
(B) Molecular Weight, Vapor
(B) Mol. Wt., Noncondensable
(B) Specific Heat - BTU/LB°F
(B) Thermal Cond.
BTU Ft/Hr Sq.Ft. °F
(B) Latent Heat - BTU/LB °F
(A) Operating Pressure - PSIG
Velocity - Ft/Sec
(A) Press.Drop Allow/Calc. PSI
Fouling Resistance (Min.)
Heat Exchanged BTU/Hr
MTD Corrected °F
Transfer Rate, BTU Hr Sq.Ft. °F -Service
Clean